Training: Start with a basic training and then take on the specific process I and II Training.Using practical examples, you will learn about processes and materials with the focus on application.

Trainings

Prerequisites:  None

Course Level: Basic

Duration: 3 days

About the course:

Basic courses are intended for beginner level direct users. The course curriculum includes the MAGMA APPROACH, the manipulation & set-up of  which are focus on filling and solidification as well as basic definition of optimizations and their assessment.

Course Overview :

Introduction of Simulation & MAGMA APPORCH

  • Geometry Perspective - Lab #1
  • Enmeshment Perspective - Lab #2
  • Definition Perspective  - Lab #3
  • Optimization  Perspective  - Lab #4
  • Simulation Perspective - Lab #5
  • Assessment  Perspective - Lab #6
  • Result Perspective - Lab #7

By the end of this session the direct user should be able to :

  • Set up a project , start a simulation & analyze results.

Who should attend

  • MAGMASOFT users(Priority)
  • Engineers, desigeers, technicians working in a casting environment or professional who work with  sand mold or die  casting processes.

Location

  • MAGMA Engineering (Suzhou) Co., Ltd
    • MAGMAacademy

Prerequisites:

  1. 6 months after completion of a basic training,
  2. Additional new users from  the same company.

Course Level:  Basic

Duration:   3 days

Course Fee:  Included in a valid Maintenance and Support Agreement

About the course:

Basic courses are intended for beginner level direct users. The course curriculum includes the MAGMA APPROACH, the manipulation & set-up of which are focus on filling and solidification only and as well as basic definition of optimizations and their assessment.

Course Overview :

Introduction of Simulation & MAGMA APPORCH

  • Geometry Perspective - Lab #1
  • Enmeshment  Perspective - Lab #2
  • Definition Perspective  - Lab #3
  • Optimization  Perspective  - Lab #4
  • Simulation Perspective - Lab #5
  • Assessment  Perspective - Lab #6
  • Result Perspective - Lab #7

By the end of this session the direct user should be able to :

  • Set up a project , start a simulation & analyze results.

Who should attend

  • MAGMASOFT users(Priority)
  • Engineers, designers, technicians working in a casting environment or professional who work with  sand mold or die  casting processes.

Location

MAGMA Engineering (Suzhou) Co., Ltd

  • MAGMAacademy 1501

Prerequisites:  Basic training

Course Level: Intermediate

Duration: 3 days

About the course:

  • The Process l course is a mandatory follow-up to the Basic course and contains additional information necessary for the completion of the basic training program. The direct users must complete at least 3 simulation projects before are eligible to attend a Process l training. After working with the software in a real-world environment, direct users may have encountered situations which were not addressed in the Basic course. The Process l course allows direct users the opportunity to discuss any problems they may have encountered. The Process l program will provide greater insight into result meaning, combining results for better understanding, discussion of defect identification using results and advanced set-up techniques.

Course Overview :

  • Review users’ projects
  • Advance modelling technique & criterion
  • In-depth analysis into simulation results
    • Filling
    • Solidification
    • Stress(if applicable)
  • Simulation report guideline
  • Process knowledge to simulation applications
  • Autonomous optimization analysis 1
  • Labs

By the end of this session the direct user should be able to :

  • Efficiently set-up, Evaluate simulation results.

Who should attend

  • MAGMAusers(Priority)
  • Engineers, designers, technicians working in a casting environment or professional who work with  sand mold or die  casting processes.

Location

  • MAGMA Engineering (Suzhou) Co., Ltd   MAGMAacademy 1501
  • On-site

Prerequisites:    Basic, Process I, Must be completed within 6 months after attending basic training

Course Level:   Advance

Duration:   3 days

About the course:

  • The Process ll course revolves around a direct user’s project which will be worked on in class with an experienced MAGMA application manager. This course will help the direct users assess the current project status, develop a strategic approach to the problem, and be provided with suggested result evaluation techniques. In most cases the scope od the project is beyond what can be completed in three days, and project work which begins in the Process l course may continue after the course days are complete.

Course Overview :

  • Review users’ projects
  • Advance modelling technique & criterion
  • In-depth analysis into simulation results
    • Filling
    • Solidification
    • Stress(if applicable)
  • Simulation report guideline
  • Process knowledge to simulation applications
  • Autonomous optimization analysis 2
  • Labs

Who should attend

  • MAGMASOFT users(Priority)
  • Engineers, designers, technicians working in a casting environment or professional who work with  sand mold or die  casting processes.

By the end of this session the direct user should be able to :     

  • Explain the root cause of      a problem,
  • Determine a strategy to find an acceptable solution,
  • Implement the strategy,
  • Effectively communicate the results to others.

Location

  • MAGMA Engineering (Suzhou) Co., Ltd   MAGMAacademy 1501 or
  • Customer site

Prerequisites:    None

Course Level:   Basic

Duration:   1-2 days

Course Fee:   Included in a valid Maintenance and Support Agreement

About the course:

The upgrade training is offered when a major software version change or upgrade occurs. Direct users who attend an upgrade training will find it easier and faster to learn the new options and features available, facilitating a smooth transition to the new version. In cases where direct users are utilizing multiple modules of MAGMASOFT®, efforts will be made to combine module functionality in one session.

Course Overview :

  • New major features of MAGMASOFT 5.4

By the end of this session the direct user should be able to :

  • Understand & use the newly introdcued features of MAGMASOFT 5.4.

Who should attend

  • MAGMASOFT users

Location

  • MAGMA Engineering (Suzhou) Co., Ltd
  • MAGMAacademy 1501
2018 Training Overview

Please contact TA at Show email or your account manager to sign in below trainings.

2018 Training Calendar

MAGMAacademy offers:

This site uses cookies to offer you a better browsing experience Privacy policy